1001	Add Port
1002	Configure Port
1003	Please enter a valid TCP/IP name.
1004	Please enter a valid TCP/IP address.
1005	Please enter a valid DECnet name.
1006	Please enter a valid DECnet address.
1007	Please enter a valid new port name.
1008	Please enter a valid input tray number for the banner page.
1009	Please enter a valid input tray number for the document.
1010	Please enter a valid output tray number.
1011	Please enter a valid log level.
1012	Please enter a valid file name.
1013	Invalid PrintServer Name
1014	Invalid PrintServer Address
1015	Invalid New Port Name
1016	Invalid Input Tray Number
1017	Invalid Output Tray Number
1018	Invalid Log Level
1019	Invalid File Name
1020	decpsmon.hlp
1021	The changes you have made will not take effect until the spooler is restarted.
1022	default
1023	Logging Options Message
1024	Error
1025	The TCP/IP protocol is not currently available.\n\nYou may configure the port for TCP/IP, but the port will not operate.
1026	The system could not determine the TCP/IP address.\n\nYou will have to enter a TCP/IP address.
1027	TCP/IP Information Message
1028	The DECnet protocol is not currently available.\n\nYou may configure the port for DECnet, but the port will not operate.
1029	The system could not determine the DECnet address.\n\nYou will have to enter a DECnet address.
1030	DECnet Information Message
1031	The port name must not be empty.
1032	Please restart the system before proceeding.
1033	Invalid Telnet Port Number
1034	Please enter a valid telnet port number.
1035	PrintServer 17 Printer (via TCP/IP or DECnet)
1036	PrintServer 17/600 Printer (via TCP/IP or DECnet)
1038	turbo PrintServer 20 Printer (via TCP/IP or DECnet)
1039	PrintServer 32 Printer (via TCP/IP or DECnet)
1040	Other PrintServer Printer (via TCP/IP or DECnet)
1041	DEClaser 3500 or 5100 Network Card (via TCP/IP)
1042	Digital RapidPrint Server (via TCP/IP)
1044	PrintServer 17
1045	PrintServer 17/600
1046	PrintServer 20
1047	turbo PrintServer 20
1048	PrintServer 32
1049	PrintServer
1050	DEClaser 3500 or 5100 Network Card
1051	Digital RapidPrint Server
1052	DECserver TCP/IP
1053	Invalid Network Details
1054	Please enter valid network details.
1055	Unable to Configure PrintServer
1056	Please reinstall the Digital Network Printing Software.
1057	Unable to activate help.
1058	Cannot configure port type 'Other Printserver'.
1059	Select a specific PrintServer type in the Port Type list of the Add Port dialog.
1060	Select a specific PrintServer type in the Port Type list of the Configure Port dialog.
1061	Invalid TCP/IP Address
1062	Invalid DECnet Address
1063	The port does not have a TCP/IP address.
1064	To configure the device associated with this port, first enter the TCP/IP address of the device in the Add Port dialog.
1065	To configure the device associated with this port, first enter the TCP/IP address of the device in the Configure Port dialog.
1066	Information
1067	Cannot configure PrintServer because the TCP/IP protocol is not currently available.
1068	Please install and configure the TCP/IP protocol via the Network Control Panel.
1101	The port name must not be empty.
1102	The port name must not contain a backslash.
1103	The port name is already in use.
1104	There is not enough memory available to validate the name.
1105	The system could not validate the port name.
1106	The log level must be 0, 1, 2, or 3.
1107	A trace file name must be provided.
1108	The system cannot open the trace file.
1109	A TCP/IP name may contain only the characters\n0-9, a-z, A-Z, period (.) and hyphen (-).
1110	The TCP/IP address must not be empty.
1111	The TCP/IP address is incorrect.
1112	A DECnet name may contain only letters and\ndigits and must contain at least one letter.
1113	The DECnet address must not be empty.
1114	The DECnet address is incorrect.
1115	The telnet port number must be a number in the range 0 to 65535.
1116	The TCP/IP address is incorrect.
1117	The subnet mask is incorrect.
1118	The gateway address is incorrect.
1119	The TCP/IP address and gateway address must be in the same subnet.
1120	The gateway address may not be the same as the TCP/IP address.
1121	The mailbox number must be between 4 and 13.
1122	The mailbox number must be between 4 and 23.
1123	The job timeout must be at least 15 minutes, or be 'no limit'.
1124	The job timeout must be an unsigned integer, or be 'no limit'.
1200	You are denied access to add a port.
1201	You are denied access to configure the port. You will be able to view the settings.
1202	Access Denied
1300	Printing now
1301	Printing complete
1302	Error corrected
1303	Warming up
1304	Output tray full
1305	Input tray missing/misaligned
1306	Cover open
1307	Paper jam
1308	PostScript error
1309	Out of paper
1310	Adjust side tray
1311	 (paused)
1312	Connecting
1313	Connecting (retrying)
1314	Connected
1401	The event number must be an unsigned integer.
1402	Please enter a valid event number, or select one from the drop-down list.
1403	No help is available for this event number.
1502	2400
1503	4800
1504	9600
1505	19200
1506	38400
1507	57600
1508	76800
1509	115200
1513	7
1514	8
1531	None
1532	Odd
1533	Even
1601	Select [Yes] to permanently configure the device at \nTCP/IP Address %s as follows:
1602	\n\nIP DETAILS \n    New TCP/IP Address:  %s \n    Subnet Mask:  %s \n    Default Gateway Address:  %s
1603	\n\nSERIAL DETAILS  \n    Baud Rate:  %s \n    Data Bits:  %s \n    Parity:  %s
1604	\n    Flow Control \n        Xon / Xoff:  %s \n        Hardware:  %s
1605	\n\nOther characteristics will be configured to default values.
1606	\n\nSelect [No] to cancel this operation and leave the device unchanged.
1607	ARE YOU SURE?
1608	Yes
1609	No
1610	There was a problem communicating with the device.
1611	The device rejected the configuration data.
1612	Please verify the the device and the network. For example, use the ping command.
1711	Dutch
1713	English
1720	French
1724	German
1731	Italian
1735	Norwegian
1738	Portuguese
1746	Spanish
1749	Swedish
1761	Install PrintServer Files
1762	Successfully Installed PrintServer Files
1763	Failed to Install PrintServer Files
1770	IMPORTANT PrintServer Information
1771	You have chosen to soft-load a Digital PrintServer Printer,
1772	but you have not yet installed the PrintServer files.\n \nPlace your
1773	Windows NT CD-ROM
1774	in the appropriate drive on this system, or in a shared network
1775	drive elsewhere, and then press the 'Install PrintServer Files'
1776	button of the 'Configure PrintServer' dialogue.\n
1777	\nThe system will expand the files from the specified directory
1778	and copy them to the \win32app\decpsmon directory of the drive
1779	that contains your 
1780	Windows NT operating system.
1781	The files require approximately eight megabytes of disk space, however
1782	after installing them you may reduce the space required by following the
1783	instructions in the
1784	\drvlib\print\decmon\readme.txt file of the Windows NT CD-ROM.
1785	Install PrintServer Files
1801	Top
1802	Bottom
1803	Envelope
1811	Top
1812	Middle
1813	Large Capacity
1821	Top
1822	Side (face-up)
1823	Mailbox
1831	Lower
1832	Side (face-up)
1833	Upper
1841	Lower
1842	Side (face-up)
1843	Upper
1844	Mailbox
1851	Side (face-down)
1852	Side(face-up)
1853	Top
1901	1
1902	2
1903	4
1904	6
1905	8
1911	On
1912	Off
1913	Reliable
1921	15
1922	30
1923	60
1924	no limit
2001	Standard
2002	High Contrast
2003	Med Contrast
2004	Little Darker
2005	Darker
2006	Brighter
2007	Little Brighter
2008	Little Low Contrast
2009	Low Contrast
2010	Lower Contrast
2011	Lowest Contrast
2012	Extra Sharp
2013	Very Sharp
2014	Sharp
2015	Soft
2201	Letter
2202	Legal
2203	Executive
2204	A4
2205	Monarch Envelope
2206	Comm10 Envelope
2207	DL Envelope
2211	Letter
2212	Legal
2213	Tabloid
2214	Executive
2215	A3
2216	A4
2217	A5
2218	B4
2219	B5
2900	Error Adding SNMP Data
2901	Community Name must be between 1 & 64 chars in length.
2902	Community Name can not contain spaces or # characters.
2903	TCP/IP Address should be of the form nnn.nnn.nnn.nnn\n	Where nnn = 0 through 255.
2904	Only 16 elements are allowed.
2905	Only one entry per Community Name & TCP/IP Address pair.\n	Access is not used to determine uniqueness.
2906	Only one entry per Community Name & TCP/IP Address pair.
3001	Couldn't find the specified file.
3002	Please specify an existing file.
3003	Specified file is already in the list.
3004	Please specify another file.
3005	Invalid TCP/IP Address.
3006	Please enter a valid TCP/IP Address.
3007	Invalid DECnet Address.
3008	Please enter a valid DECnet Address.
3009	Invalid number.
3010	Please type in a number between 1 and 99
3011	Invalid mailbox number.
3012	Please enter a valid mailbox number.
3013	Invalid job timeout.
3014	Please enter a valid job timeout.
3015	Insufficient memory.
3016	Please increase the size of your paging file.
3017	Add Font File
3018	Add Prologue File
3019	Add Setup File
3020	Postscript Fonts (*.pfb)|*.pfb|All Files (*.*)|*.*|
3021	pfb
3022	Prologue Files (*.ps)|*.ps|All Files (*.*)|*.*|
3023	ps
3024	Setup Files (*.ps)|*.ps|All Files (*.*)|*.*|
3025	ps
3026	Fonts
3027	Prologues
3028	Setups
3029	Font &Name
3030	Prologue &Name
3031	TCP/IP Address:
3032	Allow TCP/IP Address
3033	Deny TCP/IP Address
3034	DECnet Address:
3035	Allow DECnet Address
3036	Deny DECnet Address
3037	The prologue name must not be empty.
3038	The font name must not be empty.
3039	The version string must not be empty.
3040	Please enter a prologue name
3041	Please enter a font name
3042	Please enter a version string
3043	Couldn't read prologue name and version.
3044	Please specify a valid PostScript prologue file
3045	Couldn't read font name and version.
3046	Please specify a valid PostScript font file
3047	Couldn't find PRNTSRVR.DAT file.
3048	Please enter the correct path.
3049	Couldn't install PrintServer files.
3050	Configure PrintServer Printer
3051	You are about to set up your system to load (boot) and configure a Digital PrintServer printer.\n\nYou should proceed only if you intend to load (boot) and configure the printer from this system.
3052	Find PRINTSRVR.DAT
3053	Font &Files:
3054	Prologue &Files:
3055	Setup &Files:
3056	TCP/IP Access Control
3057	Allow all TCP/IP Addresses
3058	DECnet Access Control
3059	Allow all DECnet Addresses
3060	&DECimage
3061	&DECimage:
3062	Allow All Verification
3063	You have chosen to allow all TCP/IP addresses.\nAll your previous selections will be deleted.
3064	You have chosen to allow all DECnet addresses.\nAll your previous selections will be deleted.
3065	The Ethernet Address is invalid.
3066	Please enter a valid Ethernet Address.
3067	prntsrvr.dat|prntsrvr.dat|All Files (*.*)|*.*|